Table of Contents
Advertisement
CopperLink CL2300 User Manual
•
The same can be done through clicking the MibBrowser settings button on the toolbar. See
Figure 27. ManageEngine MibBrowser Settings Button on the Toolbar
By default the MIB description display and the result display are visible in the MibBrowser.
Using the TrapViewer
TrapViewer is a graphical tool to view the traps received from one or more SNMP agents. The TrapViewer can
listen to one or more port at a time and the traps can be sent from any host.
Invoke the TrapViewer through the usage of the MibBrowser. To get to know more about the MibBrowser refer
to section
"Using the MibBrowser"
Figure 28. ManageEngine TrapViewer displaying received traps
The TrapViewer has a table that displays the trap information, the common parameters text fields where neces-
sary information has to be entered and other options such as Start, Stop, Trap Details, Delete Trap and Parse-
rEditor.
Follow these steps to work on the Trap Viewer and to know more about the available options:
•
By default the value in the Port text field is 162. Enter the desired port in the field on which the viewer will lis-
ten.
•
The default value in the Community text field is public. Set the community of the incoming traps as desired,
depending on the SNMP configuration.
Using the ManageEngine SNMP Utilities
on page 103.
Figure 28
is a screen shot of the TrapViewer.
13 • SNMP Configuration
figure
27.
104
Advertisement
Table of Contents
