Star Micronics NX-2415II User Manual page 94

Set vertical tab stops in channel
Mode ASCII
Decimal Hexadecimal
Sfd.
<ESC> "b"
no
)11
27 98 ti) n] 1B 62
no
III
n2 ..
<o>
n2 0
/72
00
Cancels all current vertical tab stops in channel nO, (where nO is
between 0 and 7) and sets new vertical tab stops in this channel. (A
channel is a set of vertical tab stops selected by the <ESC> "/"
command.) See <ESC> "B" for parameters nl, n2, ... <0>.
Select vertical tab channel
Mode Ascll
Decimal Hexadecimal
Std.
<ESC> "/"
nO
27 47 n(l IB 2F
no
Selects a set of vertical tab stops designated by a channel number
(nO)from Oto 7. The tab stops in each channel are set by <ESC> "b".
Vertical tab
Mode ASCII
Decimal Hexadecimal
Both <VT> 11 OB
Feeds the paper to the next vertical tab stop and moves the print
position to the left margin. Performs a line feed if no vertical tabs are
set, as at power-up. Feeds to the top of the next page if vertical tabs
are set but the current line is at or below the last vertical tab stop.