Star Micronics NX-2415II User Manual page 100

I
Print quadruple-density 8-bit graphics
Mode
ASCII
Decimal Hexadecimal
<ESC> "Z" nl
n2
27 90
nl d
IB 5A
n] n2
Both
ml m2 ml m2 ml m2
Prints bit-image graphics at 240 dots per inch horizontally (maxi-
mum 3264 dots wide), skipping every second dot in the horizontal
direction. See <ESC> "K" for other information.
Print hex-density 24-bit graphics
Mode ASCII
Decimal Hexadecimal
<FS> "Z"
nl n2 28 90 nl n2
IC 5A
nl n2
Std.
ml m2 m3 ,,. ml m2 td .,.
ml m2 m3 .,,
Prints 24-bit dot graphics at 360 dots per inch horizontally. The
graphics image is 24 dots high and nl + n2
x
256 dots wide. Maxi-
mum width is 13.6inches (4896 dots). In the data ml, m2, m3 ... each
three bytes represent 24 vertical dots. In the leftmost position, the
most significant bit of ml is the top dot; the least significant bit of
ml is the eighth dot from the top; the most significant bit of m2 is
the ninth dot; the least significant bit of m2 is the sixteenth dot from
the top; the most significant bit of m3 is the seventeenth dot from the
top; the least significant bit of m3 is the bottom dot. The rest of the
data is similar. The number of data bytes must be 3 x (n] + n2 x 256).
Dots beyond the right margin are ignored. At the end of dot graphics
printing, the printer returns automatically to character mode.
91