Star Micronics NX-2415II User Manual page 93

Set bottom margin
Mode ASCII Decimal
Hexadecimal
Both <ESC> "N" )7 27 78 n 1
B 4E
17
Sets the bottom margin ton lines, where n is between 1 and 127 in
Standard mode or between 1 and 255 in IBM mode. The bottom
margin is reset when you change the page length.
Cancel bottom margin
Mode ASCII Decimal Hexadecimal
Both <ESC> "0"
27 79
IB 4F
Cancels the bottom margin.
Form feed
I Model ASCII I Decimal
] Hexadecimal I
Both
<FF>
12
Oc
Feeds the paper to the top of the next page according to the current
page length, and moves the print position to the left margin. When
friction feed is used, this command ejects the current page.
Set vertical tab stops
Mode] ASCII Decimal Hexadecimal
I Both I <ESC> "B" ,,/ rz2 .... <0> I 2766 nl rz2 .0
I IB
42 nl t72 .00 I
Cancels all current vertical tab stops and sets new vertical tab stops
at lines nl, n2, etc., where nl, n2, etc. are numbers between 1 and
255. The maximum number of vertical tab stops allowed is 16 in
Standard mode and 64 in IBM mode. The tab stops must be specified
in ascending order; any violation of ascending order terminates the
tab stop list. Standard termination is by the <0> control code. The
vertical tab stops are set in terms of the current line spacing and do
not move if the line spacing is changed later.
84