Star Micronics NX-2415II User Manual page 101

Select graphics mode
Mode ASCII
Decimal Hexadecimal
Std.
<ESC> "*"
no n]
27 42 }0 nl IB 2A
no n]
n2 ml m2
n2 ml m2 . n2 ml m2
Selects one of eleven graphics modes depending on the value of nO
and prints bit-image graphics in this mode. See <ESC> "K" (for 8-
bit graphics) or <FS> "Z" (for 24-bit graphics) for information on
nl, n2, ml, m2, ...
HO Graphics
mode
o 8-bit Normal-density
(60 dots per inch)
1 8-bit Double-density
( 120 dots per inch)
2 8-bit Double-density, double-speed
(120 dots per inch)
3 8-bit Quadruple-density
(240 dots per inch)
4 8-bit CRT graphics, mode I
( 80 dots per inch)
6 8-bit CRT graphics, mode II
(90 dots per inch)
32 24-bit Normal-density (60 dots per inch)
33 24-bit Double-density
(120 dots per inch)
38 24-bit CRT graphics
(90 dots per inch)
39 24-bit Triple-density
(180 dots per inch)
40 24-bit Hex-density
(360 dots per inch)
Select graphics mode
Mode
ASCII
Decimal Hexadecimal
<ESC> "[" "g"
nl n2
27 91 103
nln2
IBM
IB 5B 67
n/
n2
m(l ml m2
mOml m2 mOml m2
Selects one of eight graphics modes depending on the value of mO
and prints bit-image graphics in this mode. The graphics image is (n]
+ n2 x 256) – 1 dots wide. See <ESC> "K" (for 8-bit graphics) or
<FS> "Z" (for 24-bit graphics) for information on ml, m2, ...
mO
Graphics mode
o
8-bit
Normal-density
(60 dots per inch)
1 8-bit Double-density
( 120 dots per inch)
2 8-bit Double-density, double-speed
(120 dots per inch)
3 8-bit Quadruple-density
(240 dots per inch)
8 24-bit Normal-density
(60 dots per inch)
9
24-bit Double-density
(120 dots per inch)
11 24-bit Triple-density
( 180 dots per inch)
12 24-bit Hex-density
(360 dots per inch)
92