Star Micronics NX-2415II User Manual page 91

Line feed
Mode ASCII Decimal Hexadecimal
Both <LF>
10 OA
Prints the current line and feeds the paper to the next line. See the
preceding commands for the line spacing.
Reverse line feed
Mode ASCII Decimal Hexadecimal
Std. I <ESC>
<LF>
I 27 10 I IB OA
I
IBM I <ESC> "]" 27 93
IB 5D
Prints the current line and feeds the paper in the reverse direction to
the preceding line. Ignored when the Pull tractor unit is used.
See the preceding commands for the line spacing.
Select forwardfeed mode
Mode ASCII Decimal Hexadecimal
Std. <FS> "F" 28
70 IC 46
Cancels the reverse feed mode and selects forward feed mode. This
is the default setting at power-on.
Select reverse feed mode
Mode
Ascll Decimal Hexadecimal
Std.
<FS> "R" 28 82 IC 52
Selects reverse feed mode. Reverses the direction of all vertical
movements. Ignored when the Automatic Sheet Feeder is used.
Perform one time line feed
Mode ASCII
Decimal Hexadecimal
Both
<ESC> "J" n 27 74
n
IB 4A
n
Feeds the paper once by n times the defined base unit (n/l 80 inches
for the Standard mode). The value of n is between Oand 255. If n =
O,the line-feed distance is set to O.Does not move the print position
right or left. Does not change the line-spacing setting.
82