Star Micronics NX-2415II User Manual page 107

I
Set printer off-line
Mode ASCII
Decimal Hexadecimal
Std.
<DC3> 19 13
IBM <ESC> "Q" "~"
27 81 36 IB 51 24
Sets the printer off-line. The printer disregards all subsequent
characters and commands except <DC 1>,which returns it to the on-
line state. The printer's ON LINE indicator does not go off.
Set printer on-line
Mode
ASCII
Decimal
Hexadecimal
Both <DC I >
17 11
Returns the printer to on-line state, allowing it to receive and process
all subsequent characters and commands. This command is ignored
ifIhe printer was set off-line by pressing the(ONLINE)buttonon the
control panel.
Stop printing
Mode ASCII
Decimal Hexadecimal
IBM <ESC> "j'"
27 106
IB 6A
Prints the entire contents of the input buffer, then sets the printer off-
line. The ON LINE indicator on the control panel goes off.
Bell
Mode
ASCII
Decimal Hexadecimal
Both
<BEL>
7
07
Sounds a brief beep tone from the printer.
Bi-directional printing
Mode
ASCII
Decimal Hexadecimal
Both
<ESC> "L[" <0> 27 85 0 IB 55 00
Causes subsequent printing to be done in the normal bi-directional
mode, which is faster than uni-directional printing.
98