Star Micronics NX-2415II User Manual page 82

Enable printing of all character codes
Model ASCII
I Decimal I Hexadecimal I
Std.
<FS> "\" Ill
n2 23 92 III 112
Ic 5C 1?/ rd
I13M <ESC> 'Y"
Ill
112 27 92 n] )12 IB 5C
n/
n2
Enables printing of all characters in the IBM character set, including those
assigned to character codes which are normally considered control codes.
This command remains in effect for the next nl + rz2x 256 characters, where
nl and rz2are numbers between Oand 255. During this interval no control
functions are executed. If a code with no assigned character is received, the
printer prints a space,
Enable printing of all character codes on next character
Mode ASCII
Decimal Hexadecimal
Std.
<FS> ,' ~ ,. n
28
94 n IC 5E n
IBM - <ESC> 'cA" n
27 94 n
IB 5E n
This command operates like <ESC> '1" except that it remains in effect for
only one character.