Table of Contents
Advertisement
SERIAL INTERFACE CARTRIDGE
To run the printer in serial mode, you should use the optional Serial Interface
Cartridge, IS-8XL.
The procedure for installing the interface cartridge is:
1. Set the DIP switches on the IS-8XL before attaching it to the printer. (See
next page for detailed information.)
2. Turn off the power switch and disconnect the power cord from the power
source.
3. Disconnect the interface cable if attached.
4. Slide out the parallel interface cartridge by gripping the flips on both
sides.
5. Insert the Serial interface cartridge all the way, as shown in Figure 7-16.
.,
I
Figure 7-17. Replace the interface cartridge.
6. Connect the Serial interface cable both to the printer and to your
computer.
63
Advertisement
Table of Contents
