Star Micronics NX-2415II User Manual page 106

OTHER PRINTER COMMANDS
Set MSB to 1
Mode ASCII Decimal Hexadecimal
Std.
<ESC> ">"
27 62
IB 3E
Sets the most significant bit of each subsequent byte received to 1,
allowing users with a 7-bit interface to access characters with ASCII
codes greater than 127.
Set MSB to O
Mode ASCII Decimal Hexadecimal
Std. <ESC> "=" 27
61 IB 3D
Sets the most significant bit of each subsequent byte received to 0.
Accept MSB as is
Mode ASCII Decimal Hexadecimal
Std. <ESC> "#"
27 35 IB 23
Cancels the preceding commands and accepts the most significant
bit as it is sent to the printer.
Delete last character sent
Mode ASCII Decimal Hexadecimal
Std.
<DEL> 127 7F
Deletes the last character received. Ignored if the last character
received has already been printed, or if the last character received
was all or part of a command.
Cancel last line
Mode ASCII Decimal Hexadecimal
Both
<CAN> 24 18
Deletes the last line currently present in the print buffer,
97