Configure The Anywhereusb Manager From The Command Line; Prerequisites - Digi AnywhereUSB Plus Series User Manual

Configure the AnywhereUSB Manager from the
command line
You can configure and control the AnywhereUSB Manager from the command line.

Prerequisites

Service: If you run the AnywhereUSB Manager as a service, you need to be an Administrator.
n
Stand-alone: If you run the AnywhereUSB Manager as a stand-alone, you need to be the same
n
user that was logged in during the installation process or an Administrator. If you are not an
Administrator, and you try to configure the AnywhereUSB Manager from a command line with
the "Run as Administrator" option selected, the commands will fail.
AnywhereUSB® Plus User Guide
80