Device Info - Digi AnywhereUSB Plus Series User Manual

Configure the AnywhereUSB Manager from the command line

device info

Purpose
Displays information about a device. For more information, see
pane.
Syntax
>awusbmanager device info,< address >
The [address] is the address of the device for which you want to display information. The address is
required.
Examples
Run the list command to determine the device's address.
AnywhereUSB Manager, below are the available devices:
AW02-000001 (AW02-000001.local.:18574)
* Group 2 (AW02-000001.2) (In-use by you)
* Group 1 (AW02-000001.1) (In-use by you)
+ U3 Cruzer Micro "USB stick 1" (AW02-000001.1101)
* means Autoconnect enabled, + means Autoconnect inherited
Auto-Find: enabled
Autoconnect All: disabled
AnywhereUSB Manager not running as a service
Run the device info command.
>awusbmanager device info,AW02-000001.1101
Information about the device displays.
ADDRESS: AW02-000001.1101
LOCALNAME: USB stick 1
VENDOR: SanDisk
VENDOR ID: 0x0781
PRODUCT: U3 Cruzer Micro
PRODUCT ID: 0x5406
SERIAL: 0770000F0000000C
AUTOCONNECT: inherited
IN USE BY: YOU
AnywhereUSB® Plus User Guide
AnywhereUSB Manager Device Status
(In-use by you)
device info
91