Findme - Digi AnywhereUSB Plus Series User Manual

Configure the AnywhereUSB Plus Hub from the CLI

findme

Purpose
Turns on/off an LED to aid in finding a specific Hub among a group of Hubs.
AnywhereUSB 2 Plus: When enabled, the power LED blinks blue, then orange.
n
AnywereUSB 8 Plus and AnywhereUSB 24 Plus: When enabled, the user LED blinks green,
n
then orange.
Note You can also configure this feature on the
Syntax
findme [option]
Options
enable={on|off}
Causes the Locator LED to blink or stop blinking.
on
Causes the Locator LED to blink.
off
Causes the Locator LED to stop blinking.
Examples
Display the current state of the Locator LED
#> findme
Cause the Locator LED to blink
#> findme enable=on
AnywhereUSB® Plus User Guide
Find Me page in the web UI.

findme

126