View Hub Information In Remote Manager; Get Started With Remote Manager; Update The Firmware On The Hub From Remote Manager - Digi AnywhereUSB Plus Series User Manual

View Hub information in Remote Manager

By default, an AnywhereUSB® Plus Hub is configured to allow a connection between the Hub and
Remote Manager.
For information about enabling a Hub to connect to Remote Manager, see
n
connect to Remote Manager
For information about accessing Remote Manager and adding a Hub to Remote Manager, see
n
Get started with Remote
For more information about Remote Manager in general, see the

Get started with Remote Manager

Before you can access an AnywhereUSB® Plus Hub in Remote Manager, you must be able to access
your account in Remote Manager, and then add the Hub to the list of devices that are monitored by
Remote Manager.
1. Log into your Remote Manager account. For information about creating a Remote Manager
account and logging in, see the
2. Add the Hub
For more detailed information about using Remote Manager, see the

Update the firmware on the Hub from Remote Manager

You can update the firmware on an AnywhereUSB® Plus Hub from Remote Manager. You must first get
the current firmware file, and then you can upload it to the device.
1. Download the firmware to your
2. Log into your Remote Manager account. For information about creating a Remote Manager
account and logging in, see the
3. Click Device Management.
4. From the list of devices, click on the Hub for which you want to update the firmware.
5. In the toolbar, click More > Update Firmware. The Update Firmware dialog appears.
6. Click Browse to select the firmware file you just downloaded.
AnywhereUSB® Plus User Guide
for more information.
Manager.
Get Started
to the list of devices monitored by Remote Manager.
computer.
Get Started
Digi Remote Manager User
section in the Digi Remote Manager User
Digi Remote Manager User
section in the Digi Remote Manager User
Allow the Hub to
Guide.
Guide.
Guide.
Guide.
77