Known Hub Remove - Digi AnywhereUSB Plus Series User Manual

Configure the AnywhereUSB Manager from the command line

known hub remove

Purpose
Remove a Hub from the known Hubs list.
Note For information about using this feature in the AnywhereUSB Manager, see
known Hubs.
Syntax
>awusbmanager known hub remove,< address> [: port ]
The <address> is the address of the hub that you want to remove from the known Hub list. This is
required.
The <port> is the TCP port number for the Hub you want to remove. This is required if the TCP port
number is not the default (18574).
Examples
Run the
known hub list
want to remove.
10.10.01.12:18574
10.10.01.14:18574
10.10.01.15:5600
Run the known hub remove command.
If the TCP port number is the default, entering the port number in the command is optional.
n
>awusbmanager known hub remove,10.10.01.14
If the TCP port number is not the default, entering the port number in the command is
n
required.
>awusbmanager known hub remove,10.10.01.15:5600
Run the
known hub list
10.10.01.12:18574
AnywhereUSB® Plus User Guide
command to verify the address and port number of the Hub that you
command again to verify that the Hubs have been removed.
known hub remove
Manage the list of
108