Digi AnywhereUSB Plus Series User Manual page 16

Get started
Item Name
SFP+
3
4 DB9
console
5 Fan
5 Wi-Fi
Service
5 User
5 Power
5 WWAN1
Signal
5 WWAN1
Service
6 BT
7 Wi-Fi1
8 Wi-Fi2
9 Wi-Fi3
10 Wi-Fi4
11 WWAN2
12 WWAN1
13 Reset
button
14 Power
connector
AnywhereUSB® Plus User Guide
Description
Connect an SFP transceiver module for fiber connection, such as Finisar
Network FTLX8574D3BCL SFP+.
Used to access a console using the RS232 DTE interface.
The LED shows the status of the fan:
Solid green when the fan is running within normal range of use.
n
Solid red if the fan slows down or the Hub is overheating.
n
Reserved for future use.
LED used for the Find Me feature. When this feature is activated, the
LED blinks orange and then green. You can configure the
feature in the web UI or by using the
The LED is solid blue when the Hub is powered.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Use this button to reset the AnywhereUSB® Plus Hub configuration to
factory defaults. See Use the Reset button to restore factory
Connect the power supply.
Verify product components
Find Me
findme CLI command.
defaults.
16