Digi AnywhereUSB Plus Series User Manual page 13

Get started
Item Name
2 USB LEDs and ports
3 Reset button
4 (Power) LED
5 Power connector
AnywhereUSB® Plus User Guide
Description
The USB port supports 1.1, 2.0, and 3.1 USB devices.
The LED illuminates as follows, based on the speed of the USB
device:
1.1 (Full speed): Yellow
n
2.0 (High speed): Green
n
3.1 (Super speed): Blue
n
Use this button to reset the AnywhereUSB® Plus Hub configuration
to factory defaults. See Use the Reset button to restore factory
defaults.
The LED is solid blue when the device is powered on.
This LED is also used for the Find Me feature. When this feature is
activated, the LED blinks blue and then orange. You can configure
the Find Me feature in the web UI
command.
Connect the power supply: 5 Volt DC center positive.
The Hub draws 5 Amp maximum when both USB ports are drawing
1.8 Amps each.
Verify product components
or by using the findme CLI
13