Install The Anywhereusb Manager - Digi AnywhereUSB Plus Series User Manual

Get started
Item Name
7 Wi-Fi1
8 Wi-Fi2
9 Wi-Fi3
10 Wi-Fi4
11 WWAN2
12 Core module
13 WWAN1
14 Fan 1
15 Fan 2
16 Power connector
17 Power connector
Reset button

Install the AnywhereUSB Manager

The Anywhere USB Manager software must be downloaded from the Digi support site and installed
on your computer. After the manager software installs, the AnywhereUSB Manager launches. The
AnywhereUSB Manager automatically discovers AnywhereUSB® Plus Hubs on the local subnet.
The Windows administrator must perform the software install.
Note Once AnywhereUSB Manager has been installed, you do not have to be an administrator to
launch and use the AnywhereUSB Manager.
1. Navigate to https://www.digi.com/support#support-tools.
2. From the Support Downloads section, click Drivers.
3. Find and select AnywhereUSB Plus from the product list.
4. Select your AnywhereUSB Plus model.
5. Select and download the appropriate software for your operating system.
6. Click on the downloaded software to launch the AnywhereUSB Manager installation wizard.
The Welcome screen appears.
AnywhereUSB® Plus User Guide
Description
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Primary fan.
Secondary fan.
Connect the power supply.
Connect the second (optional) power supply. This is used for
redundancy.
The reset button is on the side of the Hub.
Press this button to reset the AnywhereUSB® Plus Hub
configuration to factory defaults. See
restore factory defaults.
Install the AnywhereUSB Manager
Use the Reset button to
16