Manually Add A Client Id - Digi AnywhereUSB Plus Series User Manual

Administrators: Configure the AnywhereUSB® Plus in the web user interface
4. The Certificate value is Unavailable until certificates have been exchanged between the
computer and the Hub. After this occurs, the Certificate value is updated to Available.
5. In the Description field, enter a descriptive name for the client ID.
6. Click the check box next to a group to which the computer is allowed access. As you select
groups, the selected group numbers appear in the Group Access field in the Settings for
Client section.
You can also manually enter group numbers in the Group Access field.
7. Click Apply to save the changes.

Manually add a client ID

You can manually add client IDs to the client list. When a computer searches for Hubs, any computer
with a client ID on the client list can connect to the Hub.
Note You can have up to 24 client IDs in the client list.
After you have added a client ID, the certificate is unavailable until the first time the computer with
the new client ID connects to the Hub. When the computer connects to the Hub for the first time, the
identity certificates are exchanged between the computer and the Hub. After the initial connection,
only that computer with the client ID and unique identity certificate is able to connect to the Hub. Any
other computer with the same client ID will be rejected. For information about computers with the
same client ID, see
WARNING! After you have manually added a client ID to the list, Digi recommends that
you use a private network to
initial
to both a known and an unknown computer, there is a risk of misidentification. In this
situation, an unknown computer may connect to the Hub before the known computer
does, resulting in the wrong computer being allowed to connect to your Hub.
Note Digi recommends de-selecting the Automatically Register Unknown Clients option if you
choose to manually add multiple client IDs to the client list. See
1. Open the web
2. Click AnywhereUSB from the Configuration section. The AnywhereUSB Configuration page
appears.
3. In the Client Settings section, click Add Client. A new row labeled "New Client" is added to
the client list and the Settings for Client section is populated for the new client.
AnywhereUSB® Plus User Guide
AnywhereUSB Manager client ID is not
connect the computer to the Hub
connection. If you do not use a private network, and the same client ID is assigned
UI.
Configure and manage client IDs
unique.
and then to
Automatically reject unknown
verify the
clients.
58