Steps
1
Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3
Connect the speaker cable to the system board.
Next steps
1
Installing the battery.
2
Installing the
base
cover.
3
Installing the
SD memory
4
Follow the procedure in
CAC reader
Removing the CAC reader
Prerequisites
1
Follow the procedure in
2
Removing the
SD memory
3
Removing the
base
cover.
4
Removing the battery.
About this task
The following image indicates the location of the Secure Digital card and provides a visual representation of the removal procedure:
24
Removing and installing components
card.
After working on your thin
Before working on your thin
card.
client.
client.