Table of Contents
Advertisement
Option
Post behavior
Table 11. POST Behavior
Option
Adapter Warnings
Numlock Enable
Fn Lock Options
Fastboot
Extend BIOS POST Time
Full Screen Logo
Description
The options are:
•
Adaptive—Default
•
Standard - Fully charges your battery at a standard rate.
•
ExpressCharge- The battery charges over a shorter period using Dell's fast charging technology.
•
Primarily AC use
•
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this option,
disable the Advanced Battery Charge Configuration option.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
•
Enable Adapter Warnings—Default
The option specifies if the Numlock function should be enabled when the system boots.
The option is set by default.
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys.
•
Fn Lock—Default
Click one of the following options:
•
Lock Mode Disable/Standard
•
Lock Mode Enable/Secondary—Default
Allows you to speed up the boot process by bypassing some of the compatibility steps.
Click one of the following options:
•
Minimal
•
Thorough—Default
•
Auto
Allows you to create an additional preboot delay.
Click one of the following options:
•
0 seconds—Default
•
5 seconds
•
10 seconds
Allows you to display full screen logo, if your image matches screen resolution.
•
Enable Full Screen Logo
System setup
73
Hide quick links:
Advertisement
Table of Contents
