Table of Contents
Advertisement
Option
M.2 SATA SSD Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup Changes
UEFI Capsule Firmware Updates
TPM 2.0 Security
Description
NOTE:
Successful password changes take effect
immediately.
By default, the administrator password is not set.
This option enables you to set, change, or delete the M.2 SATA
SSD password. Once a password is set, it remains on the SSD.
NOTE:
Successful password changes take effect
immediately.
By default, the SSD password is not set.
This option enables you to enforce the option to always set strong
passwords.
By default, the Enable Strong Password option is not selected.
NOTE:
If Strong Password is enabled, the administrator
and system passwords must contain at least one
uppercase character and one lowercase character. The
password must be at least eight characters long.
This option enables you to specify the minimum and maximum
password lengths of the administrator and system passwords.
•
min-4—By default, the minimum value is set to 4. You can
increase the value.
•
max-32—By default, the maximum value is set to 32. You can
decrease the value.
This option enables you to enable and disable the permission to
bypass the system and the internal hard drive password, when they
are set. The options are:
•
Disabled—enabled by default
•
Reboot Bypass
This option enables you to enable the disable permission to the
system and hard drive passwords when the administrator password
is set.
By default, the Allow Non-Admin Password Changes option is
selected.
This option enables you to determine whether changes to the setup
options are allowed when an Administrator Password is set. If
disabled the setup options are locked by the admin password.
This option enables you to enable or disable UEFI Capsule
Firmware. This option controls whether this system enables BIOS
update through UEFI capsule update packages. This option is
enabled by default.
This option enables you to enable the Trusted Platform Module
Technology feature. The options include:
•
TPM On—enabled by default
•
Clear
•
PPI Bypass for Enable Commands
•
Attestation Enable—enabled by default
System setup
69
Hide quick links:
Advertisement
Table of Contents
