Steps
1
Align the notch on the solid-state drive with the tab on the solid-state drive slot and insert the solid-state drive at an angle into the
solid-state drive slot.
2
Replace the screw (M2x2) that secures the solid-state drive to the palm-rest and keyboard assembly.
3
Align and replace the thermal plate on the solid-state drive slot.
4
Replace the screw (M2x3) that secures the thermal plate to the palm-rest and keyboard assembly.
Next steps
1
Installing the battery.
2
Installing the
base
cover.
3
Installing the
SD memory
4
Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1
Follow the procedure in
2
Removing the
SD memory
3
Removing the
base
cover.
4
Removing the battery.
22
Removing and installing components
card.
After working on your thin
client.
Before working on your thin
card.
client.