Steps
1
With the positive-side facing up, insert the coin-cell battery into the battery socket on the I/O board.
2
Press the battery until it clicks into place.
Next steps
1
Installing the
I/O
board.
2
Installing the
CAC
reader.
3
Installing the battery.
4
Installing the
base
cover.
5
Installing the
SD memory
6
Follow the procedure in
Touch pad
Removing the touch pad assembly
Prerequisites
1
Follow the procedure in
2
Removing the
SD memory
3
Removing the
base
cover.
4
Removing the battery.
About this task
The following image indicates the location of the touch pad assembly and provides a visual representation of the removal procedure:
32
Removing and installing components
card.
After working on your thin
Before working on your thin
card.
client.
client.