Maintenance; Safety - James Rebarscope R-C-400 Operator's Manual

Maintenance

•
If the Main 14.4V Battery does not hold a charge, the
system should come back to James® Instruments for
battery replacement. (Review Troubleshooting section (d)
before sending the unit back to James® Instruments.)
•
Calibration is recommended to be done annually, or
when display readings are suspected to be inaccurate.
•
Keep the unit clean. If dust builds up in the unit, clean it
out with compressed air.

Safety

•
Do not submerge unit in water. This can cause
electrical shock.
•
The sensor generates a magnetic field. Do not point
the sensor on products that are sensitive to magnetic
fields.
www.ndtJames.com
61