James Rebarscope R-C-400 Operator's Manual page 33

5. Choose the detection range DEEP or SHORT, that the cover
analysis will be done in.
6. Press Enter.
7. The screen now displays the cover map grid.
Step 4B:
1. After choosing to view old map a REVIEW COVER MAP menu
screen will appear.
Figure 27: Review Cover Map Screen
2. The system does not allow adjustment of previous set
parameters.
3. The only function that can be changed is that of which map to
view.
4. Choose the map number to view and press Enter.
5. The screen now displays the cover map grid with previously
saved data. New data can be saved into the gridded map along
with the older data.
28
www.ndtJames.com