Measuring Units; Clock Menu - James Rebarscope R-C-400 Operator's Manual

Measuring Units

English and Metric units are available for the user to choose from.
The following steps allow the user to choose the measuring units
viewed:
Step 1: In the main menu screen use the up or down arrow keys on
the front panel to navigate down to the system set up category.
Step 2: Press Enter.
Step 3: In the system setup screen use the up or down arrow keys
on the front panel to navigate down to the UNITS category.
Step 4: Use the right arrow key to choose either Imperial (English)
or metric measuring units.
Figure 30: Setting the Units
Step 5: Press the ESC key to go back to the main menu screen
and continue measurements.

Clock Menu

To change date and time, please follow these steps:
• Press the up or down key until you get to the setup menu option.
Press Enter. The Setup Menu sub screen should appear.
32
www.ndtJames.com