Erase Memory - James Rebarscope R-C-400 Operator's Manual

• Pressing the Enter key will store the date and time and return you
to the Main menu screen.

Erase Memory

To erase stored memory from the Rebarscope®, follow these steps:
• Press the up or down keys until you get to the system setup menu
option. Press Enter. The Setup Menu sub screen should appear.
SETUP MENU
• Scroll through the Setup menu using the up or down arrow key.
Select the Erase Memory option by pressing Enter. The display
should read the following.
ERASE MEMORY
• Press Enter once and a message telling you to press Enter again
to verify this action should appear.
PRESS ENTER AGAIN
• Pressing Enter a second time will erase ALL stored memory in
the Rebarscope® system. When complete, the phrase "Ø errors"
should be seen on the display screen.
• Pressing the Escape key will return you to the Main Menu Screen.
www.ndtJames.com
Figure 33: Save Changes When Finished
34