Software Installation - James Rebarscope R-C-400 Operator's Manual

Software Installation

The PC software that has been developed for the Rebarscope is for
data upload purposes. To install the software on your PC follow
these instructions.
To install the software:
1. Insert the Rebarscope PC Software CD into the CD-ROM
drive.
2. If the CD does not load the setup automatically, go to My
Computer, double click on the CD under devices and
double click on setup.exe.
3. The Install Shield Wizard checks for the operating system
you are using.
www.ndtJames.com
Figure 44: Installation File Location
Figure 45: Install Shield Wizard
46