Uploading Scan Map (R-C-410 only)
c. Uploading a single Scan Map.
i. On the Rebarscope® display, go to "Upload Menu".
ii. On the Data Handler Software press the Upload
Button.
iii. On the Rebarscope® display, choose
"Upload Scan Map".
iv. Now save the results into the PC.
d. Uploading multiple Scan Maps.
i. On the Rebarscope® display, go to "Upload Menu".
ii. On the Data Handler Software
press the Upload Button.
iii. On the Rebarscope® display, choose "Upload Scan
Maps".
iv. Now save the results into the PC.
Note: It is essential to move the scan cart at
a slow rate: (1 inch/sec maximum) to avoid
bad readings.
www.ndtJames.com
Fig. 58: Main Menu Screen
54