Sensor Probe - James Rebarscope R-C-400 Operator's Manual

Sensor Probe

The James® Instruments Rebarscope® utilizes the latest in eddy
current sensing technology. The heart of this technology can be
found in the sensor probe which has been specifically designed to
react to the outer surface of metal objects. With this ability, the unit
is able to accurately locate, determine the depth of, and estimate
the size of metal objects within reinforced concrete structures. This
makes the Rebarscope® sensor probe far superior to other
commercially available rebar location systems.
The Rebarscope® sensing probe is compact, weighing only 1 lb
and dimensioned at 5"x 2.4"x1.6" and still very tough and durable
for field application. The sensing probe has been calibrated in our
facility for operation with only the data logger unit it was purchased
with. If a new sensor probe is needed it is recommended to send
the complete unit in for proper calibration. Not calibrating the
sensor probe and the data logger unit together can cause
unacceptable location, cover and bar size readings. For further
information regarding repair and calibration please contact our
office.
10
www.ndtJames.com