Control Panel Buttons - James Rebarscope R-C-400 Operator's Manual

Control Panel Buttons

Key Definition
The power button. Momentarily push this key to turn
"on" the unit. Pressing it again turns off the unit. Upon
power up, the unit will display the locate screen. Press
the escape key to get to the Main Menu.
The up arrow button. This key is used to scroll through
various settings and wave frames.
The down arrow button. This key is used to scroll
through various settings.
The left arrow button. This key allows you to scroll
through various settings.
The right arrow button. This key allows you to scroll
through various settings.
The enter button. Pressing this key allows you to
choose main menu selections. The enter key also
allows you to prepare the Rebarscope® for operation.
The escape button. Pressing this key allows you to
return to the main menu screen from any sub screen.
The back light button. Depressing this key the backlight
of the display comes on. Depressing the key again
turns the backlight off.
6
www.ndtJames.com