James Rebarscope R-C-400 Operator's Manual page 49

• Pressing the left or right arrow key allows the user to select which
number of test data they want uploaded.
• Open the Rebarscope® software ("Rebarscope" will appear on the
upper left corner) on the P.C.
• Press the Lightning Bolt (Upload) icon. The P.C. software will
display "waiting for data".
• Go to the Rebarscope® and press the Enter key. Rebarscope®
software waits 50 seconds for the upload information. If no data is
received after 50 seconds a "No data received" sub screen will
appear.
• During Test upload the displays reads "Upload In Progress"
• Once the upload has been completed the display will read
"Upload complete" and data will appear on the screen. Save the
data in a desired folder.
• Pressing the Escape key will return you to the Main Menu screen.
• After upload, graphing of data should be done with PC software.
• Press the graph icon to graph the B-Scan diagram on the PC.
44
www.ndtJames.com