Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
To fit: press stud
1
into holder 2.
#
To remove: pull the floor mat off the holders
#
2.
Fitting/removing the pennant staff
Fitting
The pennant staff is fitted and removed in identi‐
cal fashion on both the driver's and front-
passenger sides.
Press the cover
1
and turn it forwards in
#
the direction of travel.
Remove the cover.
#
Seats and stowing 133
Position the pennant staff
2
horizontally on
#
the opening and press it in.
Turn the pennant staff
2
in the opposite
#
direction to the direction of travel until it is in
a vertical position and engages.