Table of Contents
Advertisement
62
Occupant safety
As a result, child restraint systems cannot
perform their intended protective function.
Rear seat backrests that are not locked can
also cause additional injuries, e.g. in the
event of an accident.
Always lock rear seat backrests after
#
fitting Top Tether belts.
Observe the lock verification indicator.
#
If the seat backrest is not engaged and locked,
this will be shown on the multifunction display
on the instrument cluster.
If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt facilitates an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
If necessary, move head restraint
#
upwards (
page 107).
/
Fold up cover
2
of Top Tether anchorage
#
3.
Fit the ISOFIX or i‑Size child restraint system
#
with Top Tether. Always comply with the child
restraint system manufacturer's installation
instructions when doing so.
Guide Top Tether belt
#
restraint
1
between the two head restraint
bars.
Hook Top Tether hook
#
4
without twisting into Top Tether anchor‐
age 3.
1
Tension Top Tether belt 4. Always comply
#
with the child restraint system manufactur‐
er's installation instructions when doing so.
Fold down cover
#
3.
If necessary, slide head restraint
#
wards (
page 107). Make sure that you
/
4
under head
5
of Top Tether belt
2
of Top Tether anchorage
1
down‐
Advertisement
Table of Contents
