Mercedes-Benz E-Class Saloon Owner's Manual page 469

Overview of the tyre-change tool kit
Plug-in hybrid: be sure to observe the notes in
the Supplement. Otherwise, you may fail to rec‐
ognise dangers.
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may fail to rec‐
ognise dangers.
Apart from some country-specific variants, vehi‐
cles are not equipped with a tyre-change tool kit.
For more information on which tyre-changing
tool kits are required and approved for perform‐
ing a wheel change on your vehicle, consult a
qualified specialist workshop.
You require the following tools, for instance, to
change a wheel:
jack
R
chock
R
wheel wrench
R
centring pin
R
% The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
The tyre-change tool kit is located under the
boot floor.
1 Jack
2 Gloves
3 Wheel wrench
4 Centring pin
5
Folding chock
6 Ratchet for jack
Wheels and tyres 467
Setting up the folding chock
Preparing the vehicle for a wheel change
Requirements:
The required tyre-change tool kit is available.
R
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.