208 Seats and stowing
Brazilian telecommunications agency ANATEL and
meets the applicable technical requirements.
Further information is available on the ANATEL
website. www.anatel.gov.br
For further information on the declaration of
#
conformity for vehicle components which
receive and/or transmit radio waves see
(
page 84).
/
Fitting/removing the floor mats
& WARNING Risk of accident due to objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and as
#
prescribed in order to ensure that there
is always sufficient room for the pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
Fitting floor mats
F118 0058 02
Slide the corresponding seat backwards and
#
lay the floor mat in the footwell.
Press studs
1
onto holders 2.
#
Adjust the corresponding seat.
#
Removing floor mats
Pull the floor mat off holders 2.
#
Remove the floor mat.
#