Table of Contents
Advertisement
146 Light and sight
Tail lamps
1
Turn signal indicator: PY 21 W bulb
2
Reversing light: W 16 W bulb
Changing the front bulbs (vehicles with halo‐
gen headlamps)
Fitting/removing the cover in the front
wheel arch
Requirements
The lighting system is switched off.
R
The appropriate front wheel is turned
R
inwards.
Removal (left-hand side of the vehicle):
#
using a screwdriver, turn rotating catches
clockwise as far as they will go.
Cover
2
will be released.
Removal (right-hand side of the vehicle):
#
using a screwdriver, turn rotating catches
anti-clockwise as far as they will go.
Cover
2
will be released.
Remove cover 2.
#
To fit: insert cover
2
into the wheel arch
#
liner.
Left-hand side of the vehicle: using a
R
screwdriver, turn rotating catches
anti-clockwise as far as they will go.
Right-hand side of the vehicle: using a
R
screwdriver, turn rotating catches
clockwise as far as they will go.
Cover
2
will be locked.
Replacing bulbs in the halogen headlamp
Requirements
High beam/low beam: bulb, type H7 55 W.
R
Indicator: bulb, type PY 21 W.
R
1
1
1
1
Advertisement
Table of Contents
