Table of Contents
Advertisement
The lighting system is switched off.
R
The cover in the front wheel arch has been
R
removed.
The bonnet is open.
R
1
Low beam
2
High beam/indicator
Turn the relevant housing cover anti-clock‐
#
wise and remove it.
High beam/low beam: turn the socket anti-
#
clockwise and remove it.
Indicator: turn the socket anti-clockwise,
#
release it and remove it.
Pull the bulb out of the socket.
#
Insert the new bulb into the socket such that
#
the entire base of the bulb is resting on the
bottom of the socket.
Insert the socket and turn it clockwise.
#
Press on the housing cover and turn it clock‐
#
wise.
Replace the cover on the front wheel arch.
#
Light and sight 147
Changing the rear bulbs (vehicles with halo‐
gen headlamps)
Opening and closing the side trim panels in
the boot
To open: release right-hand or left-hand side
#
trim panels
1
at the side and remove.
To close: reinsert side trim panel 1.
#
Replacing the tail lamp bulbs
Requirements
Indicator: bulb, type PY 21 W.
R
Reversing light: bulb, type W 16 W.
R
The lighting system is switched off.
R
Advertisement
Table of Contents
