Table of Contents
Advertisement
4
° Continuous wiping, slow
5
¯ Continuous wiping, fast
Turn the combination switch to the corre‐
#
sponding position 1 - 5.
Single wipe/washing: push the button on
#
the combination switch in the direction of
arrow 1.
í Single wipe
R
î Wiping with washer fluid
R
Replacing the windscreen wiper blades
& WARNING Risk of becoming trapped if
the windscreen wipers are switched on
while wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windscreen wip‐
#
ers and ignition before changing the
wiper blades.
Moving the wiper arms to the change posi‐
tion
Switch the ignition on and switch off again
#
immediately.
Within around 15 seconds, press button
#
î on the combination switch for approx‐
imately three seconds (
page 148).
/
The wiper arms will move into the change
position.
Removing the wiper blades
Fold the wiper arms away from the wind‐
#
screen.
Light and sight 149
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade in the direc‐
tion of arrow
1
away from the wiper arm as
far as it will go.
Slide catch
2
in the direction of arrow
#
until it engages in the removal position.
Remove the wiper blade from the wiper arm
#
in the direction of arrow 4.
3
Advertisement
Table of Contents
