Table of Contents
Advertisement
i-Size child restraint system
(ISO/R2, ISO/F2X)
Fitting the ISOFIX or i‑Size child restraint
system on the rear seat
& WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
If this is the case, the vehicle occupant
R
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
Front passenger seat
X
X Not suitable for an i-Size child restraint system in the "Universal" category.
intended and could result in additional
injury.
Objects or loads in the boot/load com‐
R
partment cannot be restrained by the
seat backrest.
Make sure that the seat backrest and
#
the rear bench seat/rear seat are
engaged before every trip.
If the seat backrest is not engaged and locked,
this will be shown on the multifunction display
on the instrument cluster.
Left/right rear seat
i‑U
i-U Suitable for forward-facing and rearward-facing i-Size child restraint systems
in the "Universal" category.
& WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system together is excee‐
ded
For ISOFIX or i‑Size child restraint systems in
which the child is secured using the seat belt
integrated in the child restraint system, the
permissible gross mass of the child and child
restraint system is 33 kg.
If the child and the child restraint system
together weigh more than 33 kg, the ISOFIX
or i‑Size child restraint system with integra‐
ted seat belt does not offer sufficient protec‐
tion. Too much load may be placed on the
ISOFIX or i‑Size child restraint systems and
59
Occupant safety
Advertisement
Table of Contents
