Table of Contents
Advertisement
150 Light and sight
Fitting the wiper blades
Insert the new wiper blade into the wiper
#
arm in the direction of arrow 1.
Slide catch
2
in the direction of arrow
#
until it engages in the locking position.
Make sure that the wiper blade sits correctly.
#
Fold the wiper arms back onto the wind‐
#
screen.
Switch the ignition on.
#
Press the î button on the combination
#
switch.
The wiper arms will move into the original
position.
Maintenance display
3
Remove protective film
1
from the mainte‐
#
nance display on the tip of the newly fitted
wiper blades.
If the colour of the maintenance display changes
from black to yellow, the wiper blades should be
replaced.
%
The duration until the colour changes varies
depending on the usage conditions.
Mirrors
Operating the outside mirrors
& WARNING Risk of injury through adjust‐
ing vehicle settings while the vehicle is in
motion
You could lose control of the vehicle in the
following situations:
if you adjust the driver's seat, the head
R
restraints, the steering wheel or the mir‐
ror while the vehicle is in motion
if you fasten your seat belt while the vehi‐
R
cle is in motion
Advertisement
Table of Contents
