6.1.4
Changing the backlight and contrast
With the GPS chartplotter turned On, briefly press [PWR] to show the light and contrast
popup window. Move the ShuttlePoint knob to the left or right to adjust the LCD backlight
intensity or up or down to change the LCD contrast. Press [ENT] to set.
6.1.5
Selecting North Up or Course Up
You may select the Chart page between NORTH UP and COURSE UP which the top of the
Chart page oriented so it will always show the area ahead of the direction your vessel is
traveling.
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight GENERAL SETUP
and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight COURSE UP/NORTH UP and press [ENT] or
move the ShuttlePoint knob to the right.
3. Another popup window will be shown with NORTH UP and COURSE UP, move the
ShuttlePoint knob to the desired selection and press [ENT] or move the ShuttlePoint
knob to the right.
4. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the
Chart page.
When the GPS chartplotter is in COURSE UP mode a small arrow icon
page indicating the direction of North.
Page 36
Figure 6.1.4 - Backlight and Contrast adjustment
Figure 6.1.5 - Course Up/North Up menu
will be shown on the Chart