Hologic ThinPrep Operator's Manual page 97

Change a Password
Enter the Admin Options screen by entering the required password. Press the Password Setting
button to view the password screen. (See Figure 3-45.)
Press the Change button and type the new word using the keyboard that appears. Press the Done
button to set the new password and return to the System Settings screen.
Remove a Password
To remove a password, access the Admin Options screen using the current password. At the
Password Settings screen, press the Disabled button. Then press the Done button to accept the
change.
Disabled button
will remove
password
requirement to
access Admin
Options.
Done button, to
accept changes
and return to
Admin Options
The password is removed. If an admin password is used later, the password has to be set up
Note:
again, as described in "To Set a Password" on page 3.27.
Figure 3-47 Disable the Password
ThinPrep
U I
SER NTERFACE
®
Integrated Imager Operator's Manual
3
Cancel button,
to abandon
changes and
return to the
previous screen
3.29