Hologic ThinPrep Operator's Manual page 124

If the slide ID is successfully read and not in the
database, the Integrated Imager immediately
begins imaging the slide.
Press the Cancel button to cancel the process
and return to the Load Slide screen.
A slide may have been imaged and already reviewed, or a slide may have been imaged and
Note:
not been reviewed. In either case, the options are to review the slide or cancel.
Do not look through the binoculars while the system is imaging a slide. The light blinks rapidly
while imaging takes place. Do not bump the instrument while imaging a slide.
If the slide ID is successfully read, but is already
in the database, the options are to review the
slide or cancel.
See "SLIDE REVIEW" on page 4.11.
Refer to Chapter 6, Troubleshooting if any other
message is displayed.
Figure 4-8 Read Slide ID Results
Figure 4-9 Imaging Slide Screen
ThinPrep
O
PERATION
Cancel button, to stop
imaging and return to
the main screen
Slide ID and date
scanned
Status message
®
Integrated Imager Operator's Manual
4
4.9