Hologic ThinPrep Operator's Manual page 169

Autoscan modes - used when performing a full slide review
Automatic start/stop
The stage moves automatically
in discrete, overlapping fi elds of
view. The degree of overlap from
row to row and the speed of stage
movement are user-adjustable.
The user may pause and resume
stage motion.
Semiautomatic start/stop
The user prompts the stage to
advance to the next fi eld of view.
The degree of overlap from row
to row and the speed of stage
movement are user-adjustable.
+
Manual
The user manually moves the
stage within each row using the
stage control knob. The degree
of overlap from row to row is
user-adjustable. The stage moves
automatically between rows. No
speed setting is necessary.
Refer to the ThinPrep ® Integrated Imager operator's manual for full operating instructions,
including any warnings, contraindications and safety information.
Hologic, Inc. • 250 Campus Drive • Marlborough, MA 01752 USA
1-800-442-9892 • 1-508-263-2900 • www.hologic.com
AW-18070-001 Rev. 001
®
ThinPrep Integrated Imager Quick Reference Guide
Integrated Imager Components
Binocular Tube
Eyepieces
Revolving Nosepiece
(4X, 10X, 40X, plus
position sensor)
Motorized Stage
Condenser
(under stage)
Coarse/Fine
Focus Knob
(on left side)
Collector
Light Intensity
Adjustment
Knob
X, Y Axis Stage Control Knobs
(Stage Control Knobs)
Review Controls
Mark
(press)
Previous
Next
(roll back)
(roll forward)
Review Control with Scroll Wheel
Microscope
Touch Screen
Power Switch
Interface
(on left side)
Computer
Review Control Controller
Power Switch
Touch Screen (example)
Computer