Hologic ThinPrep Operator's Manual page 74

3
U
SER
If the ID number is not assigned, the next display is a keyboard for entering the name of the User
Account. See Figure 3-7.
User ID numbers must be between the range of 100 to 998. Numbers beginning with a zero
Note:
will cause errors.
User ID 999 is reserved for Hologic service personnel. Do not use this ID.
Note:
Press the letter buttons to enter a first name. To create a capital letter, press the Shift button and then
press the letter. With the next letter, the system reverts to lowercase. Use the Space button for a space
and the Delete button to remove entered letters.
Press the Continue button to continue to enter the last name using the same method. Press the Done
button when finished to return to the User Accounts main screen. The new account will be listed. See
Figure 3-8.
3.6
®
ThinPrep Integrated Imager Operator's Manual
I
NTERFACE
Figure 3-7 Enter User Name Screen
Figure 3-8 User Accounts Display