AJAX MotionProtect User Manual page 5

Parameter
Temperature
Signal Strength
Battery Charge
Lid
Delay when entering, sec
Delay when leaving, sec
Connection
TH COMMUNICATION SDN BHD
Temperature of the Detector. Measured on the
processor and changes gradually
Signal strength between the Hub and the
detector
Battery level of the detector, displayed in
increments of 25%
The tamper mode of the detector, which reacts
to the detachment of or damage to the body
Delay time when entering
Delay time when exiting
Connection status between the Hub and the
detector
www.thcomm.com.my
Value
info@thcomm.com.my