Introduction; Precautions; Initial Inspection - Campbell GRANITE VOLT Series Product Manual

1. Introduction

The VOLT 108 and VOLT 116 are 24-bit analog input modules that significantly increase the
number of analog channels in a data logger system. The VOLT 108 has eight differential channels
and the VOLT 116 has 16 differential channels.
The VOLT 108 and VOLT 116 feature a 24-bit analog-to-digital converter and a low-noise, analog
front-end to provide superior analog measurements. They also support period average
measurements and include both current and voltage excitation channels.
Connect up to 50 GRANITE Measurement Modules to a single data logger.
Throughout this manual, any reference to the VOLT 100 series applies to both the VOLT 108 and
VOLT 116, unless specifically noted.

2. Precautions

READ AND UNDERSTAND the
l
WARNING:
l
Protect from over-voltage
o
Protect from water
o
Protect from ESD (electrostatic discharge)
o
IMPORTANT: Maintain a level of calibration appropriate to the application. Campbell
l
Scientific recommends factory recalibration of the VOLT 100 series every three years.

3. Initial inspection

The VOLT 100 series ships with the following:
l
GRANITE Parts Kit (1)
o
Calibration certificate. For more information watch a video
o
https://www.campbellsci.com/videos/calibration-certs.
Safety (p. iii) section at the front of this manual.
at
VOLT 100 series 1