Caburator Control - icetro SSI-300T User Manual

Caburator control

The caburator is made up of two parts.
The part that is inserted into the hole of the mixing tank is called the
body and a tube is inserted into this. The tube has a hole at the top
and at the bottom. It can't be inserted in the reverse direction.
The figure shows the caburator with a blocked hole.
If you align the protrusion of the upper area of the caburator body with
the area having no hole in the upper area of the tube, then the hole in
the lower area of the caburator body will be blocked.
Condition of use: Initial soft ice cream making
This figure shows the caburator aligned with a large hole.
Align the protrusion of the upper area of the caburator body with the
large hole in the upper area of the tube. Decrease the overrun and
increase the amount of ingredients injection in this way when you
need continuous vending of the product.
Condition of use: When the "Auto" mode is executed
This figure shows the caburator aligned with a small hole.
Align the protrusion of the upper area of the caburator body with the
small hole in the upper area of the tube. Then, it will be aligned with
the small hole in the lower area of the caburator body. Increase
the overrun and decrease the amount of ingredients injection in this
way when you expect a small amount of sales.
Condition of use: When the "Auto" mode is executed
This figure shows the caburator aligned with a medium hole.
Align the protrusion of the upper area of the caburator body with the
medium hole in the upper area of the tube. Then, it will be aligned with
the medium hole in the lower area of the caburator body. It will make
the overrun and the amount of ingredients injection adequate for sales.
Condition of use: When the "Auto" mode is executed
A small hole can improve the overrun, but it may depend on the amount of ingredients in
the mixing tank. The fewer ingredient is in the mixing tank, the higher the overrun becomes.
For your
The more the ingredient is, the lower the overrun becomes.
information
Caburator tube body
Caburator tube
31